.TH zmap 1 "06 Aug 2013" "1.0" "zmap man page"
.SH NAME
zmap \- A fast Internet-wide scanner
.SH SYNOPSIS
.B zmap 
[ 
.I "OPTIONS \&..."
] 
.SH DESCRIPTION
.I ZMap 
is a network tool for scanning the entire Internet (or large samples).
.SH OPTIONS
.SS "Basic options"
.TP
.B  \-p, --target-port=port
TCP port number to scan (for SYN scans)
.TP
.B \-o, --output-file=name
When using an output module that uses a file (such as the default),
write results to this file. Use - for stdout.
.TP
.B \-b, --blacklist-file=path
File of subnets to exclude, in CIDR notation (e.g. 192.168.0.0/16), 
one-per line. It is recommended you use this to exclude RFC 1918
addresses, multicast, IANA reserved space, and other IANA
special-purpose addresses. An example blacklist file is provided in
.B conf/blacklist.example
for this purpose.
.TP
.B  -w, --whitelist-file=path
File of subnets to constrain scan to, in CIDR 
notation, e.g. 192.168.0.0/16

.SS "Scan options"
.TP
.B \-n, --max-targets=n
Cap number of targets to probe (as a number or 
a percentage of the address space)
.TP
.B \-N, --max-results=n
Cap number of results to return
.TP
.B \-t, --max-runtime=secs
Cap length of time for sending packets
.TP
.B \-r, --rate=pps
Set send rate in packets/sec
.TP
.B \-B, --bandwidth=bps
Set send rate in bits/second (supports suffixes G, M and K). This 
overrides the
.B --rate
flag.
.TP
.B \-c, --cooldown-time=secs
How long to continue receiving after sending 
last probe  (default=8)
.TP
.B \-e, --seed=n
Seed used to select address permutation.  Specify the same seed in order to scan the same sample repeatedly.
.TP
.B \-T, --sender-threads=n
Threads used to send packets  (default=1)
.TP
.B \-P, --probes=n
Number of probes to send to each IP  
(default=1)
.TP
.B \-d, --dryrun
Print out each packet to stdout instead of sending it.
(May be useful for debugging.)

.SS "Network options"
.TP
.B \-s, --source-port=port|range
Source port(s) for scan packets
.TP
.B \-S, --source-ip=ip|range
Source address(es) for scan packets
.TP
.B \-G, --gateway-mac=addr
Specify gateway MAC address. All packets will be sent to this
Ethernet address.
.TP
.B \-i, --interface=name
Specify network interface to use.

.SS "Advanced options"
.TP
.B \-M, --probe-module=name
Select probe module  (default=tcp_synscan)
.TP
.B \-O, --output-module=name
Select output module  (default=simple_file)
.TP
.B --probe-args=args
Arguments to pass to probe module
.TP
.B --output-args=args
Arguments to pass to output module
.TP
.B --list-output-modules
List available output modules
.TP
.B --list-probe-modules
List available probe modules

.SS "Additional options"
.TP
.B \-C, --config=filename
Read a configuration file, which can specify 
any of these options  (default=zmap.conf)
.TP
.B \-q, --quiet
Do not print status updates
.TP
.B \-g, --summary
Print configuration and summary at end of scan
.TP
.B \-v, --verbosity=n
Level of log detail (0-5)  (default=3)
.TP
.B \-h, --help
Print help and exit
.TP
.B \-V, --version
Print version and exit

.SH EXAMPLES
Scan the whole Internet for hosts with port 443 open (results discarded):
.PP
.\" -p: example of
.B zmap \-p 443
.PP
Find 5 HTTP servers (port 80), scanning at 10 Mb/s, print the results to stdout:
.PP
.\" -N: example of
.\" -B: example of
.B zmap -N 5 -B 10M -p 80 -o -

.SH WARNING
By default, ZMap attempts to scan at the line speed of your Ethernet
interface and can easily use 1 Gbit/second of bandwidth. If your
network is not able to support sending packets this quickly, your
local network may become congested, causing connectivity problems for
you and those around you.  Use the -B (--bandwidth) option to set
ZMap's maximum bandwidth to an appropriate limit for your network and
upstream connection.
.
.SH AUTHOR
Zakir Durumeric,
Eric Wustrow,
J. Alex Halderman
.B (https://www.zmap.io)